主要用途Main Purposes
本系列磨床主要用于磨削双向推力角接触轴承内圈沟道,亦可用于磨削推力球轴承内圈沟道。
This series of grinders are used to grind the inner groove of bi-directional thrust angular contact ball bearings, and it also can be used for grinding of the inner groove of thrust ball bearings.
主要结构与特点 Main Structures and Features
1、SIMENS、FANUC、MITSUBISHI等成套全数字伺服控制系统;
2、砂轮进给、切入式磨削;
3、电磁无心夹具、远程控制充退磁控制器;
4、工件轴采用套筒式高精度工件轴,变频调速;
5、砂轮轴:3MB1320/1CNC、3MB133CV1CNC、3MB1340/1CNC、3MB1350/1CNC可采用动静压主轴,其余采用电主轴, 可实现60m/s高速、高精度磨削,变频调速;
6、伺服电机驱动单点金刚笔自动修整。
1、Adopting SIEMENS、FANUC、MITSUBISHlall-digital AC servo control system.
2、Wheel feeding and cut-in grinding.
3、Electromagnetic centerless clamp, magnetizing and demagnetizing controlled by remote control. The amount of magnetic power can be adjusted by digitals on operating panel.
4、Adopting a high-precision shaft with sleeve is used for workpiece with an adjustable speed by a variable frequency.
5、Wheel shaft: The dynamic and static-pressure spindles are used for 3MB1320/1CNC、3MB1330/1CNC、3MB1340/1CNC、3MB1350/1CNC and a common spindles are used for others in order to realize to grind at a high-speed of 60m/s with a high precision and frequency-variable adjustable-speed.
6、Adopting the single point diamond pen for dressing automatically.
主要技术参数 Main technical parameters
新乡亿威数控设备有限公司所在地:河南 新乡
电话:
手机:
邮箱:
地址:河南新乡高新区未来大道与107国道交汇处东南角
战略联盟/友情链接 |
|